Level Monitoring and Leak Detection

Generator Fueling Equipment > Level Monitoring and Leak Detection

OPW 200TG AST Mechanical Tank Gauge

The OPW 200TG Tank Gauge is designed for reading liquid levels in horizontal or vertical aboveground storage tanks. The 200TG Tank Gauge provides an accurate numerical counter readout, eliminating the need for any on-site manual gauging.

Materials

  • Enclosure: Powder-coated aluminum
  • Swivel Base: Hard-coat aluminum
  • Float: 304 stainless steel
  • Lenses: Tempered borosilicate
  • Gears: Acetal
  • Gaskets & O-Rings: Nitrile®
  • All Hardware: Stainless steel
  • Accuracy: + or - 2"

818 Liter Gauge

Liter Gauge

FIG 818C

The Morrison Model 818C and 918C Liter Gauges are used to measure the liquid level in an aboveground storage tank. The Liter Gauge provides an approximate read out clearly displayed in liters, and can easily be read from 6 meters away! The Morrison Liter Gauge eliminates the need to convert meters and centimeters gauge readings to liters. The 918C includes a high level audible alarm.

EVO 200

EVO™
When you fully understand both your current site needs and where you might be headed in the future, you are able to make a sound ATG selection. Be sure to address your all level and leak detection needs and operational requirements when considering which ATG is right for you. The EVO™ Series offers you four different options with right-sized features to meet the requirements of your specific application.

EVO™ 200
The EVO™ 200 can support any combination of sensors and probes up to 6. This value-level gauge provides turbine pump interface, inventory reconciliation, and tank autocalibration.

  • 6 Tank Maximum Capacity
  • 6 Sensor Maximum Capacity
  • 6 Total # of Inputs
  • Turbine Pump Interface (TPI)
  • Remote monitoring
  • Inventory Reconciliation
  • Tank Autocalibration

 

EVO 400

EVO™
When you fully understand both your current site needs and where you might be headed in the future, you are able to make a sound ATG selection. Be sure to address your all level and leak detection needs and operational requirements when considering which ATG is right for you. The EVO™ Series offers you four different options with right-sized features to meet the requirements of your specific application.

EVO™ 400
The EVO™ 400 can support any combination of sensors and probes up to 14. This mid-level gauge provides turbine pump interface, inventory reconciliation, and tank autocalibration.

  • 14 Tank Maximum Capacity
  • 14 Sensor Maximum Capacity
  • 14 Total # of Inputs
  • Turbine Pump Interface (TPI)
  • Remote monitoring
  • Inventory Reconciliation
  • Tank Autocalibration

EVO 550

EVO™
When you fully understand both your current site needs and where you might be headed in the future, you are able to make a sound ATG selection. Be sure to address your all level and leak detection needs and operational requirements when considering which ATG is right for you. The EVO™ Series offers you four different options with right-sized features to meet the requirements of your specific application.

EVO™ 550
The EVO™ 550 can support up to 36 sensors and 36 probes. This premium-level gauge provides all of the functionality of the EVO 200 and EVO 400 plus electronic line leak detection, secondary containment monitoring, and DEF/AdBlue® recirculation.

  • 36 Tank Maximum Capacity
  • 48 Sensor Maximum Capacity
  • 48 Total # of Inputs
  • Turbine Pump Interface (TPI)
  • Remote monitoring
  • Inventory Reconciliation
  • Tank Autocalibration
  • Electronic Line Leak Detection
  • Secondary Containment Monitoring

DEF/AdBlue® Recirculation

S940

Sensor Alarm Console
The S940 Sensor Alarm Console is a cost effective solution for tank overfill protection and sensor leak detection needs. This easy-to-install-and-operate device monitors up to four tanks, containment sumps or interstitial spaces and provides an audible and visual indication of an alarm condition. Two programmable relay outputs are included to sound an external alarm or send a signal to a building control or monitoring system. The weather proof enclosure allows the S940 Sensor Alarm Console to be conveniently installed indoors or out.

Model 277

The Midget Model 277 Pneumatic gauge provides an economical way to achieve reliable and accurate tank gauging in vented tanks. Pneumatic gauges have been used for many years in tank gauging systems requiring remote indication with accuracy and stability over wide temperature ranges. These gauges are supplied with custom dials, depending on the application. Dial scales may be manufactured to indicate proportional (i.e. E, ¼, ½, ¾, F), litres, gallons, feet & inches, percentage of full and dual scale.

The Model 277 Midget Levelometer is recommended for tank capacities up to 5000 gallons. The maximum tank height is 10 feet. Its 3 ½" (90°) dial provides up to 50 graduations and is generally accurate to ± 2%.

Ktech is pleased to announce that our Midget 277 Levelometer is now certified to following standards:

  1. ULC/ORD-C180-97 Liquid Level Gauges and Indicators For Fuel Oil and Lubricating Oil Tanks
  2. UL 180 Standard of Safety: Liquid-Level Gauges for Oil Burner Fuels and Other Combustible Liquids

The Midget Model 277 Pneumatic gauge provides an economical way to achieve reliable and accurate tank
gauging in vented tanks